Denon AVR1910 Best Prices!
 |
Denon AVR1910 Best Prices!.
Product: Denon AVR1910 Amazon Price: Too low to display Availability: In Stock |
Compare Prices on Denon AVR1910
Last year I spent several months trying various A/V receivers when I upgraded to bluray and a unique plasma TV. I tried an Onkyo 606, Denon 988, and a Yamaha 663 and ultimately ended up with the Yamaha RX-V663 as I felt it gave the best performance for the money. I decided to switch to a different receiver after I changed my home theater setup and began to route everything to the tv via 1 HDMI cable. The Yamaha's video processing on HDMI sources was graceful, but other analog sources were seriously degraded when converted to digital. So my search began again.
After many months of research at various forums and websites, here were my conclusions about the unusual 2009 models:
1. Yamaha 665 added extra HDMI inputs and video upscaling which is qualified but also lop weight by about 8 lbs mainly from the amplifier which means less output and smart sound.
2. Onkyo 607 is mainly the same as last year's, with an extra HDMI for a total of 5 inputs. Added Dolby Prologic II Z which is more of a gimmick than useful from what I have read. Peaceful runs very hot and has same bad video processing chip. Questionable reliability.
3. Harman Kardon was the stamp I owned before my Yamaha and I really esteem them, but last year had excessive amounts of glitches with video and audio compatibility. Most have been corrected prefer I'm not willing to recall that chance as of yet.
4. Pioneer makes a nice unit in the 1018 last year, but this year the 1019 has been carve drastically in weight too. Power amp has been prick down to lower levels. Nice GUI and ipod compatibility built in, but a puny extinct in the power part.
5. Sony. Never really been fond of Sony receivers in the past. ES series is nice, but pricey. I personally never even considered anything below the ES line.
And that brings us to the 1910:
I am flat out blown away by this receiver. The main reason I wanted it was for the Audyssey processing. The only thing I was in treasure with on the Onkyo 606 I tried out was the Audyssey dynamic EQ. The 988 I demoed did not have it but the 1910 does and it is worth every penny. I have 2 little kids and even though my theater room is 2 floors below, I obviously can't listen at reference volumes. Audyssey dynamic EQ along with Dynamic Volume is a knockout combo. The bass response and sound from the rears is jaw dropping at lower levels. I would pay great, powerful more objective for this feature. Last night I listened to Goo Goo Dolls live from Buffalo DVD and I heard things I never heard in the mix before. Every strum on the guitar and bass line was alive and sure. Drums thumped and vocals were crystal sure. I also watched Live Free or Die Hard on bluray (thanks Amazon for the lightning deal!!) and the surround attain at -35db on the volume was nothing short of spectacular. Speaking of spectacular, the Audyssey auto setup nailed everything perfectly. I have a 6.1 Jamo surround setup consisting of 4 matched satellites, a larger center, and a smaller rear center. The 1910 has independent crossover levels for each speaker, unlike my Yammy which was one global setting. The crossovers were slow on for each of the 3 different speakers. Levels and EQ settings were perfect. My room is 18 x 22 and my wife even commented how on the other side of the room not in the sweet set for listening, the sound was mighty better than before. I am running all 6 ohm speakers and this thing seems to have plenty of power for my room size.
The 1910 has the Anchor Bay scaling chip this year instead of the Faroujda chip last years 1909 had and from what I have seen so far, it handles component to HDMI signals with no problems.
I always plan Denon was overpriced and over hyped after trying the 988. With the added Audyssey features and half the mark, this 1910 is the deal of the century. The only drawbacks are:
1. Dreadful remote. I have a Harmony One so it' not powerful of an instruct for me.
2. Confusing at times. I have quite a bit of experience setting up home theater equipment so I made it through OK, but I did have to hit the manual several times which is poorly written. A sprint to the AVS forums has a fraction specifically for Denon setup and can really wait on newbies.
3. No GUI. This receiver has the blocky white on shadowy on veil demonstrate. It really was not noteworthy of an voice for me. Others may care.
4. No pre-outs. I have no need for an external amp. Others might.
Bottom line is that for the money, this receiver has all the pros and very few cons. I idea my Yamaha sounded natural, shapely, and extremely lifelike. This Denon has me floored in comparison. Makes everything else seem tiring, and insensible. If you have some electronic knowledge, don't hesitate. 4 HDMIs, HD audio, plump Audyssey suite, Anchor Bay chip, and a big power piece makes this thing a knockout!!
I bought this receiver a month encourage when they inaugurate arriving at Best Select. Always been a fan of Denon's, have AVR 788 which I treasure.
The most distinguished thing 1910 adds is the Dolby TrueHD and DTS-HD Master Audio. These are original 'lossless' codecs that Blu-Ray discs now a days have. While not significantly different than normal Dolby/DTS, these provide more possibilities to the sound engineers And since they are starting to employ it, better design your receiver to be future proof.
I've a 7.1 setup and the receiver produces an awesome sound. The setup was a go ( I don't collect the complaint Denon's are hard to setup!), Audyssey helped somewhat, but I changed the levels to my liking after the Audyssey setup. Crisp, deep sound. Never had my 128kbps mp3s sound so respectable! Esteem the dynamic sound control, almost a gimmick but works flawlessly to control the sound during those annoying informercials!
HDMI A/V passthrough works substantial, 4 HDMI inputs are more than enough. Remote is ravishing terrible, but I have Harmony one which sets up easily to control.
As far as other brands, I compared this system to Onkyo's, Harmon's, Yamaha's and this blows them away. Since Marantz and Denon merged a while befriend, Denon's have improved their quality to be almost like Marantz. Can't account for Marantz brand, I deem I got almost everything Marantz offers.
Will recommend the system to anyone who wants professional quality system at almost a bargain mark!
Before I inaugurate this review, I must confess that I'm not an audiophile by any means. But I do have hearing sensitive enough to stare compression artifacts in low-bitrate (<160kbps) mp3s in distinct songs. So I can like lossless high-quality audio.
Short summary: I've owned this receiver for one month, and am very gay.
I had a decent 5.1 receiver before, but it was 6+ years venerable, didn't back HDMI and thus lacked the lossless audio formats (DTS-MA, Dolby TrueHD) . I now have a 1080p HDTV and a blu-ray player, so it was only fitting that I'd upgrade the receiver to regain the beefy high-def experience: video AND audio.
My requirements were simple: at least 4 HDMI inputs, assist for lossless audio via HDMI (LPCM at minimum, since PS3 handles decoding unbiased glowing), ability to upconvert all input from digital and analog sources to 1080p over HDMI, and had to be under $[...].
There are a few other brands of receivers that fit the requirements (Sony, Onkyo, Pioneer), but I settled on the Denon because it contained a few extras that sweetened the deal: improper heat (ugh, Onkyo), no major HDCP handshake issues (Sony should know better), Audyssey (which the Pioneer lacked), and Dolby PLIIz.
Despite the Denon's terrifying manual, setup was a hobble thanks in immense allotment to online guides ([...]) .
My first impressions: even before running the Audyssey setup, I was blown away. I tested it with Blu-ray versions of Ironman and The Shadowy Knight and was timid that I could gain such definite sound out of my low-end miniature speakers.
After running Audyssey with the included microphone, I'm even more impressed. Tweaking is unnecessary- it automatically detects optimal crossover frequencies, speaker distances, sizes, etc- something that would've taken me hours to radiant tune through countless research and trial+error. I can unruffled tweak individual settings if need be, but I'm philosophize with the ones chosen by the Audyssey setup.
Another added bonus: the receiver's ABT scaling chip. My TV (Toshiba RV530) doesn't have the best upscaling ability. Before, 480i broadcasts from the DVR/cable looked terrible- I had to force myself to only view HD channels. The upscaling ability of this receiver is far better than what my TV has to offer, and I now consume the receiver to upscale everything to 1080p.
[...].Also, support in mind that the AVR-790 is practically identical to this model (achieve for 1 or 2 very minor features), and is often priced $50 less than this one.
